Aptio Change Logo Utility

high-powerbrown.netlify.com › Amibcp Version 5.0 ★

ChangeLogo also allows logos to be extracted from existing Aptio ROM files. Aptio V Aptio 4 AMIBIOS 8. ChangeLogo allows developers to easily change logos displayed by Aptio at boot. The full screen 'splash' logo and small logos appearing on the main screen during POST can be replaced with custom logos. ChangeLogo also allows logos to be extracted from existing Aptio ROM files. View Data Sheet. Supported Products: Aptio V Aptio 4. Aptio V Aptio 4 AMIBIOS 8. ChangeLogo allows developers to easily change logos displayed by Aptio at boot. The full screen 'splash' logo and small logos appearing on the main screen during POST can be replaced with custom logos. ChangeLogo also allows logos to be extracted from existing Aptio ROM files. Supported Products: Aptio V.

Discussion in 'BIOS. Version Aptio V. I found some old versions. Found amibcp 5.0.2, not crashing any longer but still not parsing the BIOS. AMIBCP is a Shareware software in the category Audio & Multimedia developed by AMIBCP. The latest version of AMIBCP is currently unknown. Audacious 3.10.0.

The UBU tool uses the AMI Aptio MMTools v4.50.0.23 (for the older Aptio IV BIOSes) resp. V5.0.0.7 (for the newest Aptio V BIOSes) and supports all Intel and AMD platform BIOSes. Unfortunately, the currently available AMI Aptio V MMTool v5.0.0.7 has problems with the update of certain BIOS modules of the latest Intel chipset mainboards (X99. Home Computer Asus Aptio It will select only qualified and updated drivers for all hardware parts all alone. In fact, AMI created Aptio to specifically address OEM and ODM issues with both BIOS and UEFI. Translate texts with the world's best machine translation technology, developed by the creators of Linguee.

BIOS/UEFI Utilities for Aptio and AMIBIOS

Custom UEFI and BIOS utilities for Aptio and AMIBIOS simplify the development and debug experience. AMI's Aptio firmware offers an easy transition to the Unified Extensible Firmware Interface (UEFI) specification, giving developers all the advantages of UEFI - modularity, portability, C-based coding - while retaining easy-to-use tools that facilitate manufacturing and enhance productivity. AMI's rich set of utilities for BIOS ROM image customization without rebuilding the firmware provide a clear advantage in reducing both time and cost.

AMI Firmware Update (AFU)

AMI Firmware Update (AFU) is a scriptable command line utility for DOS, Microsoft Windows®, Linux, FreeBSD and the UEFI shell. Utilized for factory or field BIOS updates, AFU is flexible enough to update the entire Flash part or only a portion. It programs the main BIOS image, boot block or OEM configurable ROM regions.

AMI Firmware Update Utilities:

Aptio VAptio 4AMIBIOS 8

AMI BIOS Configuration Program (AMIBCP)

The AMI BIOS Configuration Program (AMIBCP) for Aptio enables customers to modify parameters in a BIOS ROM without rebuilding from source. Developers can modify default values for BIOS setup parameters, modify default boot order in BIOS setup, view and edit sign-on and setup strings, and edit SMBIOS string data.

Amibcp Version 5

Supported Products:

Aptio VAptio 4AMIBIOS 8

AMI Setup Control Environment (AMISCE)

AMISCE is a command line tool which provides an easy way to update NVRAM variables, extract variables directly from the BIOS, change settings using either a text editor or a setup program and update the BIOS. AMISCE produces a script file that lists all setup questions on the system being modified by AMISCE. The user can then modify the script file and use it as input to change the current NVRAM setup variables.

Supported Products:

Aptio VAptio 4

AMI Setup Data Extraction (AMISDE)

AMISDE is a command line tool for exporting setup data from an Aptio ROM image, including spreadsheet applications such as Microsoft Excel®. It generates a helpful summary report of BIOS setup parameters and default values that enhances productivity in testing and manufacturing.

Supported Products:

Aptio VAptio 4

AMISLP

AMISLP allows the insertion of Microsoft System Locked Pre-Installation (SLP) key files into the BIOS image. SLP keys are used for OEM activation of Microsoft Windows® 7 and Vista®. For Windows® 8.1 and Windows® 10, the OEM Activation 3.0 eModule is used in conjunction with AFU v2.35 or greater.

Supported Products:

Aptio VAptio 4AMIBIOS 8

AMI Utility Configuration Program (AMIUCP)

AMIUCP is a utility that is used to pre-configure the Aptio Flash Utility (AFU). Users can insert and exchange the default command string and ROM image used in AFU to create a customized version of the utility. AMIUCP supports AFU v2.35 or AFUWINGUI v1.12 or later.

Please verify your product is powered on comoaq connected, then try again in a few minutes. Windows 7 Drivers Avaliable for HP / Compaq 2710pModify your browser’s settings to allow Javascript to execute. AGFEO ISDN AS 2x Driver Download for windows.

Supported Products:

Aptio VAptio 4AMIBIOS 8

Change Logo

ChangeLogo allows developers to easily change logos displayed by Aptio at boot. The full screen 'splash' logo and small logos appearing on the main screen during POST can be replaced with custom logos. ChangeLogo also allows logos to be extracted from existing Aptio ROM files.

Supported Products:

Aptio VAptio 4

Desktop Management Interface Edit (DMIEdit)

DMIEdit is a scriptable command line utility for DOS, Microsoft Windows®, Linux and the UEFI shell. The Desktop Management Interface Editor for Aptio enables developers to modify strings associated with platform SMBIOS tables (System, Base Board, Chassis, OEM string, etc). In manufacturing, use DMIEdit to embed platform serial numbers, UUID and license keys into the SMBIOS table, which identifies platforms to management software.

Supported Products:

Aptio Change Logo Utility

Aptio VAptio 4AMIBIOS 8

AMI Key Management (AMIKM)

The AMIKM utility program can write PK, KEK and signature database information to the target system. Please note that the SMI Variable module is required in order to use AMIKM.

Supported Products:

Aptio VAptio 4

Module Management Tool (MMTool)

Aptio's Module Management Tool (MMTool) allows developers to manage firmware file modules contained within an Aptio firmware ROM image. Use MMTool to extract, replace and insert binary components such as modules, Option ROMs, microcode patches and ROM holes using its graphical or command line interface. With MMTool, developers can also create reports on the contents of an opened ROM image.

Supported Products:

Change

Aptio VAptio 4

AMI UEFI ROM Dissect Tool (AMIRDT)

The AMIRDT utility makes it easy for developers to dissect a UEFI ROM and produce related reports on ROM status and size. This powerful tool can dissect ROMs down to section level, dissect NVRAM Variables, compare two ROMs and search the GUIDs of a given FFS to provide a summary of their sizes from ROM.

Supported Products:

Aptio VAptio 4

Signing Server

AMI's Signing Server is a robust solution for managing the signing process, Secure Firmware Update, Secure Boot and other custom signing processes. The Signing Server includes three key components to give developers precise control over the signing process: Signing Service, Signing Server Management Console and Signing Client.

Supported Products:

Aptio VAptio 4

Utilities are available for Windows,
DOS, Linux, BSD and EFI Shell

Please contact AMI Sales for more information.

08-24-2015, 12:20 PM (This post was last modified: 08-25-2015, 01:18 PM by pro.phantom.Edit Reason: ADD WARNING)
Good morning/evening!
I explain here step by step how to modify your notebook BIOS to unlock hidden functions for an UEFI AMI Aptio4 BIOS.
This Tutorial was made using an MSI GS60 2QE Ghost Pro 4K, with MS-16H5 Motherboard (HM87), but it should be the same for other models carrying AMI Aptio4.
Things you need:
- Latest Original BIOS from MSI
- Rufus 2.xx (to create a FreeDOS boot-able USB) download from https://rufus.akeo.ie/downloads/rufus-2.2p.exe
- AFUDOS v3.06 (BIOS update utility from AMI for DOS with BIOS security bypass feature)
- AfuWin (BIOS update utility from AMI for Windows NT)
- AMIBCP v4.53 (BIOS Configuration Program)
- (optional) AMI ChangeLogo ( to change BIOS boot logo )
DOWNLOAD:http://rghost.net/86YPHPPZv
BiosTools.zip (Size: 4.93 MB / Downloads: 2,413)
(optional) You can use my already modified BIOS with almost all settings unlocked.
If you do so, skip steps 5 and 5a and use 'mod.rom' included in zip to flash.
(it's BIOS version E16H5IMS.10F unlocked, should be used ONLY for the same notebook as mine)
If after booting you see MSI logo with Hello World Edition!, it was flashed correctly.
WARNING!! DO THIS AT YOUR OWN RISK, BAD FLASH CAN BRICK YOUR BIOS
STEPS BY STEP:
1. Update BIOS to the latest official MSI version.
Follow steps provided by MSI.
2. Load Optimal Default Settings in BIOS.
3. Boot to your Windows OS
4. Open AFUWINGUI.EXE to make a backup of your current BIOS image.
- Click on 'Progress' tab, then Click on 'Save' Button
- Choose where to save and put a name on it or leave it as afuwin.rom
- After completed, click 'Exit'.
- Save a copy of the backup to a safe place, just in case.
5. Open AMIBCP.exe (Where the fun begins)
- Click File -> Open, then select the backup saved on step 4. (afuwin.rom or however you named it)
- Just change Access/Use from 'Default' to 'USER' to every menu/sub-menu/option you want to unlock.
- After you changed everything you want to unlock, Click on the 'Save' button (overwrite the current, don't use save as)
- Now Close program, if asked you can select save changes again (doesn't matter).
5a. (OPTIONAL) Change OEM Boot Logo.
- Open ChangeLogo.exe, click on 'Load Image'
- Select thje modified BIOS already edited with AMIBCP.
- Click 'Save Logo'.
- Now edit it as you wish with mspaint, gimp etc. but preserve the dimensions and format.
- To change it, click 'Browse' -> Select the edited logo, then click on 'Replace Logo'
(it will say something like: JPEG not supported, do you want to continue?. Click YES)
- Now Click Save Image as (overwrite current or chose another name you wish with .rom)
6. Create a boot-able USB with FreeDOS.
- Open rufus, select your USB stick and check create a boot-able disk using FreeDOS as shown in image.
- Click Start (it will destroy everything on the USB so use an empty one)
7. Copy AFUDOS.EXE and the modified BIOS to the root folder of your boot-able USB.
8. Make sure that the files where correctly saved into the USB stick (compare SHA-1/MD5 checksums, file size, etc.)
if everything is cool, reboot your computer. VERY IMPORTANT: Check that modified rom size match with the backup created in step 4, if mismatch don't continue you may be doing something wrong.
9. Enter in BIOS load default settings, in Boot mode select LEGACY. (this may not be needed)
- in boot order select USB Hard Disk (or hold F11 while booting to select USB stick)
- Save changes & Exit..
10. Now boot into FreeDOS.
- Select your keyboard layout.
- DOS prompt will appear, type dir to check that you are on the correct directory.
!!BEFORE TO FLASH BIOS!! Make sure your laptop is connected to the AC power cord. (also good to have just the usb stick plugged in, no other usb gear connected)
- To start flashing, type: (replace mod.rom with the name you saved earlier)
afudos mod.rom /GAN
- hit ENTER, it will start flashing.
!!WARNING!! If you get a warning about size mismatch or something similar DO NOT CONTINUE.Never flash if size don't match!
When you see Verifying all blocks .. done. and retunred to the DOS promt you then can Power off laptop.
- Push your poweroff button, then disconnect your AC Power charger and keep disconnected for some seconds (like 10seconds, this is only for laptops with integrated battery, if you can remove battery do it for few seconds, this it's also not needed in most cases)
11. DONE! Now re-connect AC power cord and power on your laptop, you should see your new Logo at booting (if you replaced it)
- Enter BIOS, now you should see all the unlocked menus.
12. Enjoy your unlocked BIOS and have funs!!
If if it was helpful for you, you can donate some coins if you wish.
Donate Bitcoin: 1H7AP8Zm69WXbqLWm6kK6rvSyCQsjiGTKi
  1. American Megatrends BIOS Update

Author:- Stephen Harrison B.Sc., M.Sc., MBCS, CITP, MInstM
View My Profile

The American Megatrends BIOS Update process is the second part in the series on the AMIBIOS.

Attention!

I strongly advise reading through this how to article first, before attempting a BIOS update.

If you are still unsure, please DO NOT attempt to update. Contact your local computer repair shop, or call your computer makers support line for advice.

Part 1 introduces you to the AMIBIOS, the beep codes if there is a fault, and the BIOS Setup Utility.

There are 3 Steps in the AMIBIOS update process. Listed below is a link to each part.

Step 5 gives you the opportunity to share your expertise of BIOS updates. Is it a good idea or not? Do you know of a better way to update computer BIOS programs? Share your knowledge!

Step 6 enables you to jump directly to the thoughts and views of other visitors to this web page. Take a look. You may find out something new!


Attention!

Just letting you know there are personal ads published on this site

If you are running an Ad Block you can whitelist my site to see them

Thank you for your time


Contents


Introduction

An American Megatrends BIOS Update is sometimes necessary because, like any other software, improvements are made to improve stability and performance.

You should really update your computer's BIOS when a newer version is released.

This is easier to do these days (20+ years ago it was a nightmare!). AMI and other computer manufacturers provide free Flash BIOS Utilities which update your BIOS for you when you run the program (more on this later).

However, I think the AMI instructions are not very clear for typical home computer users. This tutorial aims to make the process as clear as possible for you.

There are a few things to do first before updating your computer's BIOS.


Motherboard Identification

There are different AMIBIOS products on different computer systems. Most computer makers change the AMIBIOS code to suit their own computer models.


Attention!

Aptio Change Logo Utility Program

Modern computers now come with a new type of BIOS, called Unified Extensible Firmware Upgrade (UEFI). Click here for more details.


The image below is from the AMI website, and shows you how to identify whether your home computer has a native AMI approved motherboard or not.


Where it says 'BIOS from 1991-Present', there is a reference to AMI and the motherboard type, if it is a AMI approved motherboard.

This reference looks something like: AMIS875-P, signifying a Series S875 AMI Motherboard (it actually says AMI123-P on the image above as an example).

If your computer does not have an AMI reference, refer to your computer providers website for guidance. If you require more details on this step, go to the AMI BIOS (Opens New Window) web page.

Aptio change logo utility file

If you don't understand this step. Don't worry! Download the AMIBID(Opens New Window) motherboard identification tool. Simply install and run on your computer.

If the AMIBID utility fails, go to the CPUID (Opens New Window) web page, download and install the CPU-Z tool. This is another motherboard identification utility.


From the example above, this computer has an AMIBIOS, but it is not an AMI motherboard. In this instance, the home computer user must visit the ASRack website and search for the BIOS update for the ALive motherboard.


Aptio change logo utility download

Attention!

This is Very Important! You must always use the BIOS update made available by your motherboards manufacturer.


AMIBIOS ROM And Flash Utility

If you determine you have an AMI motherboard, download the AMI Firmware Update Tool(Opens New Window).

Unzip the American Megatrends BIOS Update utility. Go to the AFUWIN folder (under the AMIBIOS parent folder), then either the 32-bit or 64-bit sub-folder. Left click AFUWIN.EXE.

Click OK if this disclaimer appears.


Click the Open Button to search for and select the ROM file you downloaded from your motherboard manufacturers website.


Attention!

Click SAVE to take a copy of your existing BIOS Settings. If anything goes wrong you have an option to restore!


Click the Flash Button. The Process tab will be displayed to show you the update BIOS process in action.


American Megatrends BIOS Update In Action

When the process is complete, exit the Flash Utility and Restart Your Computer (if it doesn't restart for you).

Your BIOS is now updated to the latest version. Refer to the AMIBIOS Support web page if further support is required.


American Megatrends BIOS Update | Final Thoughts

The American Megatrends BIOS Update process is a little complicated. I hope the information provided on this web page is useful. Good luck with your BIOS update.

A very useful link is to the AMI BIOS and UEFI Utilities page(Opens New Window). There is a form at the bottom of the page where you can request extra support from AMI direct.

Don't forget to take a look at part 1 of this tutorial series, which introduces you to the BIOS concept, AMIBIOS beep error codes and the BIOS Setup Utility.


Attention!Download alesis1394 wdm audio driver free.

If you enjoyed this article please share on your social media by selecting the share buttons


Attention!

Head over to the Computer-Help forum for lots of knowledgeable articles by site visitors on all subjects technology-related. Feel free to contribute your thoughts by completing the form, and commenting on existing articles.

Keep up with the latest eComputerZ news and developments

I never share information with third parties and your details are secure. I aim to issue newsletters on the first day of each month.


Is There A Better Way Than This?

Some professionals recommend you don't update your BIOS unless absolutely necessary. This is good advice if you are a true novice.
Do you agree? Do you know of a better, easier way to update your AMI BIOS than what is described in this article?

Other Visitors Opinions

Click below to see contributions from other visitors to this page..

BIOS Access When Fast Boot Is Enabled
Question: How to disable fast boot (no USB functionality) if the MOBO only has USB ports and no PS2? Answer: By disabling USB, then USB keyboard …

La PC Menciende Pero No Responde A Ninguna Acción
Hola mi nombre es Carlos Torres. La pc enciende pero en el pre arranque no responde a ninguna accion. Solo queda en la pantalla una imagen con el logo …

Forgotten BIOS Password Reset Steps
Thanks for all your information about AMI.. Please tell me how can I reset the BIOS password on my Sony Vaio CW Series (VPCCW) After I updated my …

BIOS Update Via Program or Software Utility Available
I have an American Megatrends BIOS Motherboard. However, in the BIOS Setup there is NO OPTION for SATA Controller and other Configurations. I have a …

Ami-aptio Nb 2006 Drivers

BIOS Update By Command Prompt
I update the American Megatrends BIOS using the following method: 1. Get the correct BIOS .ROM File from the AMI web Site or my Computer provider's …


Aptio Change Logo Utility Download

Top Trending Related Articles

  • Sound Card Not Working? Learn How To Fix It Here

    Is your sound card not working? Learn how to identify and fix your sound card problems

  • Optional Computer Repair Technician Tools

    Computer repair technician tools are essential. Here we look at some additional options tools to add to your kit bag. Can you leave them out?

  • Computer Toolkit | Components and Cables

    What components and cables should you include in your computer toolkit? PSU's? Cables? Hard Drives? Read on to find out

  • Essential Computer Repair Tools | Cables and Adapters

    Computer repair tools vary, and include items from inside your device, such as disk drives and Molex converters. Read on for more details

  • PC Tool Kit | Hardware Testers

    An IT technicians PC tool kit is not complete without testers. This article focuses on the different hardware testers available and how to use them

Thank You for stopping by. Keep up with the latest eComputerZ news and developments. Sign up here.

I never share information with third parties and your details are secure. I aim to issue newsletters on the first day of each month.

Ami Aptio Drivers

See Previous Newsletters and the eComputerZ Blog, Facebook Page and Twitter Feed

Ami Corporation Aptio Crb Drivers

Aptio Change Logo Utility Download


Ami Aptio Drivers

Return to the Table of Contents

Feel free to ask them to do the same to protect your rights. So I will provide the original link for you as well. Acura nav iso torrent.

Grant write to directory in oracle. Hi, my laptop crashed and when it turned back on it booted into Aptio Setup Utility. When I exit out without saving it takes me straight back to the main menu of the utility, when I save and exit it takes me to the ASUS startup screen for a bit before shoving me straight back into the utility. When I try the 'fix' here http/www.tomsguide.com/answers/id-1854127/solve-probl.. it just gives me the message 'reboot and select proper boot device or insert boot media in selected boot drive and press a key '. Any suggestoions on what to do next?
Hi, my laptop crashed and when it turned back on it booted into Aptio Setup Utility. When I exit out without saving it takes me straight back to the main menu of the utility, when I save and exit it takes me to the ASUS startup screen for a bit before shoving me straight back into the utility. Ad aware pro 8 1 0 keygen for mac. When I try the 'fix' here http/www.tomsguide.com/answers/id-1854127/solve-problem-aptio-setup-utility.html it just gives me the message 'reboot and select proper boot device or insert boot media in selected boot drive and press a key '. My laptops model number is N551JQ I am running Windows 8. My laptop came pre installed with a SSD by the way. I'm stuck and any help would be much appreciated. Thanks

Comments are closed.